Lanzar VIBE241 Vibe 1000 Watt 2 Channel Mosfet Amplifier

Lanzar VIBE241 Vibe 1000 Watt 2 Channel Mosfet Amplifier Review

See more picture

Lanzar VIBE241 Vibe 1000 Watt 2 Channel Mosfet Amplifier Feature

• 2 x 250 Watts RMS at 4 Ohms
• 2 x 500 Watts Max at 4 Ohms
• 1 x 1000 Watts Max at 4 Ohms Bridged
• 2 x 420 Watts at 2 Ohms RMS
• MOSFET Automatically Switches to Maintain Rated Power Over a Wide Range of Battery Voltages

2 x 250 Watts RMS @ 4 Ohms 2 x 500 Watts Max @ 4 Ohms 1 x 1000 Watts Max @ 4 Ohms idged 2 x 420 Watts @ 2 Ohms RMS MOSFET Automatically Switches to Maintain Rated Power Over a Wide Range of Battery Voltages Stiffly Regulated PWM-Type Power Supplies Variable Input Level Controls for Each Pair of Cannels Variable High Low Pass Crossover Controls High-Efficiency, Heavy Aluminum Heatsink Remote Subwoofer Bass Control Electronic Crossover Network Bass Boost Circuit idgeable at 4 Ohms 2 Ohm Stereo Stable Gold RCA Inputs Line Outs for Left Right Channels Power Protection LED Indicators Advanced Protection Circuitry Soft Turn On/Off Frequency Response: 15 Hz-35 kHz S/N Ratio: 90 dB Fuse: 15A x 2 Dimensions: 10.25-InchW x 2-InchH x 15-InchL

Check price now

Rerate Products

Customer Review

Oct 31, 2011 23:45:04

DP Audio Video DA1200.5 5-Channel 1200Watts MOSFET Bridgeable Power Amplifier

DP Audio Video DA1200.5 5-Channel 1200Watts MOSFET Bridgeable Power Amplifier Review

See more picture

DP Audio Video DA1200.5 5-Channel 1200Watts MOSFET Bridgeable Power Amplifier Feature

• 5-Channel MOSFET Bridgeable Power Amplifier
• 5 Ohm 240W x 5Ch (1200W) Max Power
• Built-in Short Circuit and Overheating Protection
• Low Pass Filter and High Pass Filter Variable
• Built-In Crossover

.00

Check price now

Rerate Products

Customer Review

Oct 13, 2011 09:24:34

Kole Audio TRAX4-840-Watt Four-Channel MOSFET Power Amplifier

Kole Audio TRAX4-840-Watt Four-Channel MOSFET Power Amplifier Review

See more picture

Kole Audio TRAX4-840-Watt Four-Channel MOSFET Power Amplifier Feature

• 30X SCHNEIDER-KREUZNACH VARIOGON Optical Zoom Lens (35 mm equivalent - 28-840 mm) zooms in faster and closer than ever to deliver crisp, steady shots for extraordinary creative performance.
• 12 Megapixel high quality - CMOS sensors deliver higher quality pixels better pixels are better than more pixels and Kodak's first BSI CMOS sensor delivers stunning low-light picture quality with less noise and less blur no flash needed
• Optical image stabilization
• Capture that challenging action shot with fast, click-to-capture speed and auto focus.
• Program auto mode (P) camera sets optimal shutter speed and aperture combination

Midnight Blue Anodized Finish w/ Silver End Caps MOSFET Power Supply Pulse Width Modualtion Circuitry; Three-Way Protection Circuitry (short, thermal & overload) 2 Ohm Stereo, 4 Ohm Bridged Stable; Tri-Mode Capable Selectable Variable 12dB Hi/Full/Low Pass Crossovers 200mV - 6V Low Level Input Sensitivity (4 ch. models) 200mV - 3V Low Level Input Sensitivity (2 ch. models) Pre-Amp Outputs Dash Mount Remote Gain Control (2 ch. models) Input Selector (4 ch. models) ; 30-500Hz LPF (2 ch. models); 40-250Hz LPF (600 & 4 ch. models); 50-500Hz HPF (2 ch. models); 40-250Hz HPF (600 & 4 ch. models); Variable 0-24dB 45Hz Bass Boost (2 ch. models); Selectable 18dB 45Hz Bass Boost (600 & 4 ch. models); Variable 12 dB 30-175Hz Subsonic Filter (2 ch. models); Frequency Response: 10Hz - 30kHz; Signal-to-Noise Ratio: 97dB; Total Harmonic Distortion: .02%; 4 ga. Power & 8 ga. Speaker Terminals

Check price now

Rerate Products

Customer Review

Oct 12, 2011 03:54:02

Boss Audio R8002 2-Channel Mosfet Power Amplifier with Remote Subwoofer Level Control

Boss Audio R8002 2-Channel Mosfet Power Amplifier with Remote Subwoofer Level Control Review

See more picture

Boss Audio R8002 2-Channel Mosfet Power Amplifier with Remote Subwoofer Level Control Feature

• 2-Channel MOSFET Power Amplifier
• Remote Subwoofer Level Control Included
• Blue Illuminated BOSS Logo
• 800W x 2 Max Power
• 200W x 2 RMS Power

Your first view of the RIOT Series may deceive you. The elegant lines are a textbook exercise in minimalist design. From this point on, however, its power and reproductive authenticities will be anything but minimal. Perhaps the only thing more extensive than the features showcased is the enjoyment you'll derive from them. This is only one reason BOSS Audio has led the way in 12 Volt Entertainment for almost a quarter of a Century.

Check price now

Rerate Products

Customer Review

Oct 09, 2011 20:33:34

Brand-X L105X4 740-Watt 4-Channel Mosfet Amplifier

Brand-X L105X4 740-Watt 4-Channel Mosfet Amplifier Review

See more picture

Brand-X L105X4 740-Watt 4-Channel Mosfet Amplifier Feature

• 105 Watts X 4 Channel @ 4 Ohm - Subsonic Filter: 27Hz - 0/4 Gauge Billet Style Machined High Current Power & Speaker Terminal Block - Soft Turn-on/Turn-off
• 185 Watts X 4 Channel @ 2 Ohm - Variable Bass Boost @ 45Hz: 18dB - High Quality Surface Mount, RCA Inputs & RCA Outputs - Fuses: 2 x 20 Amp
• 370 Watts X 2 Channel Bridged @ 4 Ohm - Discrete Class AB MOSFET Mobile Audio Amplifier - Wired Bass Remote Control - Dimensions: 11.57''W x 2.71''H x 14.64''L
• Hi Pass Crossover: 40Hz-4KHz @ 12db (Ch1/2/3/4) - Top Mounted Fully Adjustable Linkwitz Riley Crossover Network - Heavy Duty Power Aluminum Heat sink
• Low Pass Crossover: 40Hz-400Hz @ 12db (Ch1/2/3/4) - Full Range Pass Thru Line Outputs - Power & Protection LED Indicators

105 Watts X 4 Channel @ 4 Ohm 185 Watts X 4 Channel @ 2 Ohm; 370 Watts X 2 Channel idged @ 4 Ohm; Hi Pass Crossover: 40Hz-4KHz @ 12db (Ch1/2/3/4); Low Pass Crossover: 40Hz-400Hz @ 12db (Ch1/2/3/4); Subsonic Filter: 27Hz; Variable Bass Boost @ 45Hz: 18dB; Discrete Class AB MOSFET Mobile Audio Amplifier; Top Mounted Fully Adjustable Linkwitz Riley Crossover Network; Full Range Pass Thru Line Outputs; 0/4 Gauge Billet Style Machined High Current Power and Speaker Terminal Block; High Quality Surface Mount, RCA Inputs and RCA Outputs; Wired Bass Remote Control; Heavy Duty Power Aluminum Heat sink; Power and Protection LED Indicators; Soft Turn-on/Turn-off; Fuses: 2 x 20 Amp; Dimensions: 11.57''W x 2.71''H x 14.64''L

Check price now

Rerate Products

Customer Review

Oct 08, 2011 06:41:03

Pyle PLA2200 2-Channel 1400-Watt Bridgeable Mosfet Amplifier

Pyle PLA2200 2-Channel 1400-Watt Bridgeable Mosfet Amplifier Review

See more picture

Pyle PLA2200 2-Channel 1400-Watt Bridgeable Mosfet Amplifier Feature

• 700 Watts x 2 Output Slim Size Amplifier Design For Easy Installation
• Variable Hi/Lo Electronic Crossover Network
• Gold Plated RCA Inputs Outputs
• Power And Protection LED Indicators
• 1400 watts x 1 Bridged Output

Amazon.com Product Description The Pyle PLA2200 1400W 2-Channel Chopper high performance car amplifier extends the Pyle tradition into a totally new series of amp, designed from the ground up to deliver the power, performance, and flexibility the modern car enthusiast demands.

Providing high-end performance at an affordable price, Pyle products offer hard-to-find features customers demand. These components will provide the professional and occasional enthusiast with an unbeatable combination of performance, flexibility and price.

High-end performance at an affordable price. Click to enlarge.

Click to view features and controls.

Bass Boost Level Control
Permits adjustment of the bass level up to an increase of approximately up to 18dB.

Crossover Mode Selector
When used with normal, full range system, set this switch to "Full". If you wish to use the internal crossover to power a driver or specific frequency range, use the "LPF" or HPF" for the "Low Pass" or "High Pass" settings.

Input Level Controls
Enables the matching of levels to the output levels from the head unit (or other original source). The input sensitivity of adjustment ranges from 6V to 200mV.

Sub Sonic Control
When the sub sonic selector switch is in "On" mode, this filter control permits continuously variable adjustment from 10 to 100Hz.

Aux Line Outs
This amp features gold plated RCA Jacks for Aux line outputs. Use these outputs for unlimited systems expansion. Power Terminals
These connectors will deliver power, ground, and remote turn-on control to the amplifier.

Speaker Terminals
These terminals are 14K gold plated to guarantee high conductivity and minimum signal

Features include:

• Variable Hi/Lo Electronic Crossover Network
• Variable Input Level (Gain) Control
• Switchable Bass Boost
• Power and Protection LED Indicators
• Low Level Inputs
• Gold Plated RCA Inputs and Outputs
• Slim Size Amplifier Design For Easy Installation
• Thermal / Overload / Short Circuit Protection
• Anti-Thump Turn-on
• Soft Turn-On Circuit
• Remote Turn On/Off

What's in the Box
Pyle PLA2200 1400W 2-Channel Chopper high performance car amplifier, manual The Pyle Chopper series has been specially designed from the bottom up to provide quality sound in a sturdy form factor. You’ll be blasting your tunes and rocking the block with these amps. The PLA2200 is a two-channel, 1400-watt bridgeable power amplifier. It’s equipped with everything you’ve come to expect from quality car amplifiers – switchable bass boost, variable gain control, and a configurable electronic crossover network. The RCA ports are gold-plated for eliminating signal loss. A subsonic filter allows low-end interference to be cut, so your speakers will always be delivered the highest quality audio. The MOSFET pulse width modulation power supply allows for a clean, distortion-free signal to your speakers. To keep both your car and the amplifier safe, this model is equipped with thermal, overload, and short circuit protection. And this amp’s slim size makes installation a breeze – you’ll have no trouble finding a spot for this powerful little device. So chop up your tunes and play them for the world with the Pyle Chopper.

Check price now

Rerate Products

• Dual BP1204 12-Inch 1100-Watt Illumination Bandpass Subwoofer
• Pyle PLAM14 20 Feet 8 Gauge 1000 Watts Amplifier Hookup For Battery Head Unit and Speakers Installation Kit
• Boss KIT-2 Complete 8 Gauge Amplifier Installation Kit
• Pyramid BNPS102 10-Inch 1000-Watt Dual-Bandpass System with Neon Accent Lighting
• Pyle PL1290BL 12-Inch 1200 Watt DVC Subwoofer

Customer Review

Oct 03, 2011 17:04:34

Kole Audio TRAX4-1600-Watt Four-Channel MOSFET Power Amplifier

Kole Audio TRAX4-1600-Watt Four-Channel MOSFET Power Amplifier Review

See more picture

Kole Audio TRAX4-1600-Watt Four-Channel MOSFET Power Amplifier Feature

• Features -
• Asagi Wars - After the main game, there is another whole new game waiting for you; the main character changes from a Prinny to Asagi and your weapon changes from a knife to a gun
• Time Lapse - Depending on the time of day, the stage structure and enemies will change; this adds a new challenge every time you play the same stage at a different time
• 2x Volume - Prinny 2 has over double the game play content of Prinny 1; more enemies, stages, and weapons are at your disposal
• Secrets - The game has an incredible amount of secrets to unlock, with hidden characters, enemies, bosses, and items to collect

Midnight Blue Anodized Finish w/ Silver End Caps MOSFET Power Supply Pulse Width Modualtion Circuitry; Three-Way Protection Circuitry (short, thermal & overload) 2 Ohm Stereo, 4 Ohm Bridged Stable; Tri-Mode Capable Selectable Variable 12dB Hi/Full/Low Pass Crossovers 200mV - 6V Low Level Input Sensitivity (4 ch. models) 200mV - 3V Low Level Input Sensitivity (2 ch. models) Pre-Amp Outputs Dash Mount Remote Gain Control (2 ch. models) Input Selector (4 ch. models) ; 30-500Hz LPF (2 ch. models); 40-250Hz LPF (600 & 4 ch. models); 50-500Hz HPF (2 ch. models); 40-250Hz HPF (600 & 4 ch. models); Variable 0-24dB 45Hz Bass Boost (2 ch. models); Selectable 18dB 45Hz Bass Boost (600 & 4 ch. models); Variable 12 dB 30-175Hz Subsonic Filter (2 ch. models); Frequency Response: 10Hz - 30kHz; Signal-to-Noise Ratio: 97dB; Total Harmonic Distortion: .02%; 4 ga. Power & 8 ga. Speaker Terminals

Check price now

Rerate Products

Customer Review

Aug 29, 2011 20:34:47

Boss PH4.400 Phantom 1600 Watt Mosfet 4-Channel Bridgeable Amplifier with Remote

Boss PH4.400 Phantom 1600 Watt Mosfet 4-Channel Bridgeable Amplifier with Remote Review

See more picture

Boss PH4.400 Phantom 1600 Watt Mosfet 4-Channel Bridgeable Amplifier with Remote Feature

• Four-channel Phantom amplifier with MOSFET power supply and trimode operation
• Delivers 400 Watts x 4 at 2 ohms; 160 Watts x 2 at 4 ohms; 800 Watts x 2 bridged
• Line and speaker level inputs with variable gain control
• Built-in low- and high-pass variable crossovers; 18dB bass boost
• Includes remote subwoofer level control

New for 2010, Boss Audio's Phantom power amplifiers cover a wide variety of applications. Four- and two-channel full-range models will match perfectly with your speaker system. MOSFET amplifiers deliver plenty of power, while bass boost and built-in high- and low-pass crossovers allow you to customize your cabin acoustics to your taste. The PH4.400 is a four-channel MOSFET amplifier delivering 1600 watts peak power.

A four-channel MOSFET amplifier delivering 1600 watts peak power. Click to enlarge.

Phantom amps include a remote subwoofer level control.

Trimode Operation
This allows you to send your signal to a tri-way crossover for adding a subwoofer to a two-channel signal.

Remote Subwoofer Level Control
Phantom amps include a remote subwoofer level control for easy level adjustments.

Line/Speaker Level Inputs
Separate line and speaker level inputs mean the amplifier can handle high-level signals from receivers lacking RCA outputs.

Built-In Crossovers
This amplifier features variable high- and low-pass crossovers, so you can adjust the sound to suit whatever speakers you're driving.

Variable Gain Control
Allows you to match the input gain to your receiver for better sound with less distortion.

MOSFET Power Supply
For high performance with low heat.

Bass Boost
Add a little extra low-end power with 0 to +18dB of variable bass boost.

Power and Protection LEDs
Protection LEDs let you know when there's a problem.

What's in the Box
Boss PH4.400 Amplifier, Subwoofer Level Control, User's Manual Boss PH4.400 Phantom 1600 Watt Mosfet 4-Channel Bridgeable Amplifier with Remote

Check price now

Rerate Products

• Boss KIT-2 Complete 8 Gauge Amplifier Installation Kit
• Pioneer CD-R55 Remote Control
• Boss PH3000D Phantom 3000 Watt Class D Monoblock Amplifier with Remote
• Pioneer TS-A6993R 6-Inch X 9-Inch, 460-Watt 5-Way Speakers
• BlackBerry 8520 Unlocked Phone with 2 MP Camera, Bluetooth, Wi-Fi--International Version with No Warranty (Black)

Customer Review

Aug 25, 2011 21:16:36

Boss CX1100M Chaos Exxtreme 1100 Watts Monoblock MOSFET Power Amplifier

Boss CX1100M Chaos Exxtreme 1100 Watts Monoblock MOSFET Power Amplifier Review

See more picture

Boss CX1100M Chaos Exxtreme 1100 Watts Monoblock MOSFET Power Amplifier Feature

• MAX POWER, 1 OHM, N/A; MAX POWER, 2 OHM 1100w x 1; RMS POWER, 4 OHM 250w x 1; MAX BRIDGED POWER, 4 OHM N/A
• SIGNAL-TO-NOISE RATIO, > 105 dB; THD, 0.01%
• DIMENSIONS: 11-7/8-InchW x 2-5/8-InchH x 10-9/16-InchL
• Remote subwoofer level control; Line and speaker level inputs; Variable gain control; Input sensitivity selector
• Variable lowpass crossover; Power and protection LEDs; 0-+18dB selectable bass boost; MOSFET power supply

CHAOS EXXTREME 1100 Watts, Monoblock MOSFET Power Amplifier

Check price now

Rerate Products

• Boss KIT-2 Complete 8 Gauge Amplifier Installation Kit
• Dual BP1204 12-Inch 1100-Watt Illumination Bandpass Subwoofer
• Boss BV9990 In-Dash 7" DVD/MP3/CD Widescreen Receiver with USB, SD Card, and Front Panel AUX Input
• Boss D10F PHANTOM 10-Inch 4-Ohm Flat Subwoofer
• Legacy LAMP4 1600 Watt 4 Gauge Amplifier Installation Kit

Customer Review

Aug 13, 2011 16:14:45